Ice-O-Matic EMF 1106 Series Specifications


Produces up to 1152 lbs. (524 Kgs.)* of ICE per day

Constructed from sturdy, corrosion-resistant
300 series stainless steel

Only 16 inches wide

Available with an air-or water-or
remote-cooled condenser
ICE-O-Matic is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Problem
Tight-Fitting Spaces
Kitchen space utilization
Poor Ice Quality
Ice is too wet and soft
Operating Environments
Built to last?
Dirty Air Filter
Forget to change the air filter?
*Rated at 70 ° (21°) Air / 50° (10°) Water
EMF 1106 Series
Flake ICE Maker
Solution
Maximum ICE
Maximum ICE production in a minimum amount of space :
• No additional side clearance required on a
30 inch wide bin
• Maximum ICE production in a 16 inch cabinet
• Works on all industry dispensers and bins
Dependable ICE
ICE-O-Matic Flake ICE Makers remove excess water by
pushing the flaked ICE through an extrusion process.
The result is high quality flaked ICE which is ideal for
medical, supermarket or restaurant applications.
ICE-O-Matic Tough
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Filter-Free Air
No air filter to change
EMF 1106 on a B55 Bin