5.
Slightly tilt the outboard motor up until the
tilt support bar automatically returns to
the free position.
6.
Slowly lower the outboard motor to the
normal position.
EMU32860
Power tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
EWM00660
WARNING
Place the gear shift in neutral before set-
G
ting up for shallow water cruising.
Return the outboard motor to its normal
G
position as soon as the boat is back in
deeper water.
ECM00260
CAUTION:
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32940
Power tilt models
1.
Place the remote control lever / gear shift
lever in neutral.
2.
Slightly tilt the outboard motor up to the
desired position using the power tilt
switch.
UP
UP
DN
Operation
ZMU01935
53