Remove A Link Aggregation Group - NETGEAR Orbi Pro WiFi 6 Mini router User Manual

Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
4. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
For the router (base) and each satellite, the ports display on the page. The ports that
are connected are outlined in blue. Unused ports are outlined in gray.
6. In either the Base (router) or Satellite section, click an Ethernet port that you want to
become part of a LAG.
The Bind button displays between the selected Ethernet port and the adjacent
Ethernet port. (If the port does not support link aggregation, the Bind button does
not display.)
7. Click the Bind button.
The ports are bound in a LAG. The ports now share a single VLAN Profile menu and
Mode menu, that is, they share the same VLAN and port mode.
8. Click the Apply button.
Your settings are saved.

Remove a link aggregation group

You can remove a link aggregation group (LAG). First remove the LAG, and then remove
the cables.
To remove a LAG:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Manage the LAN and WAN
Settings
134 User Manual