Table of Contents
Advertisement
Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30
LED behavior
When you sync an Orbi Pro WiFi 6 Mini satellite to the Orbi Pro WiFi 6 Mini router, the
LED behavior for a satellite that comes in an Orbi Pro WiFi 6 Mini system is different
from the LED behavior for add-on Orbi Pro WiFi 6 Mini satellites.
Orbi Pro WiFi 6 Mini System LEDs
The following table describes the LED behavior for an Orbi Pro WiFi 6 Mini router (model
SXR30) and Orbi Pro WiFi 6 Mini satellite (model SXS30) that are purchased together
and come in the same package.
Table 1. Orbi Pro WiFi 6 Mini System router and satellite LED descriptions
LED
LED Behavior
Power LED
The Power LED is located adjacent to the power connector on the rear panel.
• Solid green: Power is on.
• Solid amber: The router or satellite is booting.
• Blinking amber: The router or satellite is resetting to factory default settings.
• Blinking red: The firmware is corrupted.
• Off: Power is not supplied.
Router bar LED
The bar LED is located on the front.
• Pulsing white: The router is booting or someone pressed the Sync button.
• Off: The router finished booting and is working normally.
• Solid white: The router is resetting to factory default settings.
• Solid magenta: The router cannot connect to the Internet. See You cannot access the
Internet on page 184.
Satellite bar
This satellite is included when you buy an Orbi router. The bar LED is located on the front.
LED
• Pulsing white: The satellite is booting.
• Blue for three minutes: The connection between the satellite and the router is good.
• Amber for three minutes: The connection between the satellite and the router is fair.
• Magenta: The satellite failed to sync to the router. See The router and satellite do not
sync on page 182.
• Off: The satellite synced to the router and is working normally.
Overview
12
User Manual
Advertisement
Table of Contents
