Step 10 Secure Dishwasher To Cabinet; Step 11 Connect Water Supply - Frigidaire FMB330RG Installation Instructions Manual

STEP 10 SECURE DISHWASHER
TO CABINET
The dishwasher must be secured to the countertop.
• Position the dishwasher so that the tub flange aligns with the
front face of the cabinet frame.
IMPORTANT: Check to be sure the dishwasher is
centered in the opening and there is no interference with
adjacent cabinets when opening or closing the door.
Figure S
• Fasten the dishwasher to the underside of the countertop
with the 2 Phillips screws provided.
IMPORTANT
straight and flush. Protruding screw heads will scratch the top
of the control panel and can interfere with door closing.
Installation Instructions
Align Tub
Fla nge
to Fro nt
Fac e of
Cab inet
Fra me
Drive screws
–
STEP 11 CONNECT WATER
SUPPLY
Connect water supply to 90° elbow.
• Slide compression nut, then ferrule over end of water line.
• Insert water line into 90° elbow.
• Slide ferrule against elbow and secure with compression nut.
Figure T
IMPORTANT
door spring does not rub or contact the fill hose or water supply
line. Test by opening and closing the door. Re-route the lines if a
rubbing noise or interference occurs.
9
Compression Nut
Ferrule
Hot Water
90° Elbow
Supply Line
Check to be sure that
–