Apex Digital DIGI-STIM User Manual page 24

English
The ME system is intended for use in the electromagnetic environment specified below.
The customer or the user of ME should assure that it is used in such an environment.
Emissions.test
Emissions
CISPR.14-1
Harmonic.emissions
IEC.61000-3-2
Voltage.����������
emissions.IEC.61000-3-3
DIGI STIM_3 languages .indd 22
Declaration – electromagnetic emissions
Compliance
Passed
Passed
.
Passed
22
Electromagnetic.environment.-.guidance
The.ME.system.must.emit.electromagnetic.energy.
in.order.to.perform.its.intended.function..Nearby.
electronic.equipment.may.be.affected.
The.ME.system.must.be.used.only.in.a.shielded.
location.with.a.minimum.RF.shielding.effectiveness.
and,.for.each.cable.that.exits.the.shielded.location,.
a.minimum.RF.��� .attenuation.of.80.dB.from.
10.MHz.to.20.MHz,.100.dB.from.20.MHz.to.80.
MHz.and.80.dB.from.80.MHz.to.100.MHz..(The.
minimum.at.20.MHz.is.100.dB.and.the.minimum.at.
80.MHz.is.80.dB.)
The.ME.system,.when.installed.in.such.a.shielded.
location,.is.suitable.for.use.in.all.establishments.
other.than.domestic.and.those.directly.connected.
to.the.public.low-voltage.power.supply.network.that.
supplies.buildings.used.for.domestic.purposes.
2013/2/23 AM 09:12:15