LENCO DIR-140 User Manual page 15

Method 2: When the radio is on, lonpress the play/pause button on the RC to disable the WIFI
The wifi will automatically enable once the radio is turned on again.
6.4 Time/Date

Set Time/Date

Auto Update

Set Format

Set Timezone

Daylight savings
6.4.1 Set Time/Date
The date and time are displayed as dd-mm-yyyy with the first value, dd, active (flashing). Adjust each
value with the knob control. As each value is set by pressing the knob control, the next value
becomes active ready for adjustment.
6.4.2 Auto-update (from DAB, FM or Network)
Auto-update works with data sent over DAB, FM or the Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode you use regularly. DAB and FM use time signals
broadcost with radio transmissions. Network uses a time signal sent from the internet radio portal
when in any network-connected mode.
1. Select Update from DAB, update from FM, update from Network or No update.
2. If you are updating from the network, set your time zone.
3. If your country uses a daylight saving, the automatically updated time from the network may be
wrong by one hour. When daylight saving adjustments is in effect, such as British Summer Time
(BST), turn on the Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the Daylight savings option has no effect
on the clock's time. Radio will auto-update from the selected source when time information is
available.
6.4.3 Set format
Allows you to change between 12 and 24 hour display.
6.4.4 Set timezone
Allows you to choose the timezone you belong to
6.4.5 Daylight savings
Allows you to choose ON or OFF of your daylight savings.
6.5 Language
The default language is English. TO change, selec Menu > System settings > Languages > the select
your language
15