Table of Contents
Advertisement
Overview of Features
The DTX-MFM, DTX-GFM, and DTX-SFM fiber modules
are used with a DTX Series CableAnalyzer to test and
certify fiber optic cabling installations. The fiber modules
offer the following functions and features:
•
Measures optical power loss and length on dual-
fiber cabling. The DTX-MFM tests multimode cabling
at 850 nm and 1300 nm. The DTX-SFM tests
singlemode cabling at 1310 nm and 1550 nm. The
DTX-GFM features a VCSEL LED for testing
multimode cabling at 850 nm and 1310 nm for
Gigabit Ethernet applications.
•
Each module transmits both wavelengths (850 nm
and 1300 nm, 850 nm and 1310 nm, or 1310 nm and
1550 nm).
•
Provides pass/fail results based on industry-standard
limits.
DTX-MFM/GFM/SFM Fiber Modules
•
Visual fault locator helps you locate breaks, bad
splices, bends, and check fiber continuity and
polarity.
•
FindFiber
fiber connections.
Registration
Registering your product with Fluke Networks gives you
access to valuable information on product updates,
troubleshooting tips, and other support services. To
register, fill out the online registration form on the Fluke
Networks website at www.flukenetworks.com/registration.
function helps you identify and verify
1
Advertisement
Table of Contents
