DTX-MFM/GFM/SFM Fiber Modules
Users Manual
Autotest in Far End Source Mode
Use Far End Source mode to measure loss at one
wavelength on individual fibers.
PASS
TEST
FAIL
TALK
TONE
LOW BATTERY
F1
F2
F3
EXIT
TEST
ENTER
SAVE
AUTO
SINGLE
TEST
SETUP
TEST
SPECIAL
MONITOR
FUNCTIONS
TEST
TALK
TALK
1
A
Tester and smart remote with fiber modules
B
Memory card (optional)
C
Two AC adapters with line cords (optional)
D
Two patch cords (match fiber and connectors to be
tested, SC at tester end)
28
2
3
Figure 11. Equipment for Testing in Far End Source Mode
Far End Source mode requires a stand-alone optical
source. Figure 11 shows the equipment required for
testing fiber in Far End Source mode.
5
4
E
One short patch cord (match fiber and connectors to be
tested)
F
One adapter of the appropriate type
G
Mandrel. Recommended when testing multimode fiber
with a DTX-MFM module. See page 10.
H
Fiber cleaning supplies
6
7
8
amd51f.eps