DTX-MFM/GFM/SFM Fiber Modules
Users Manual
DTX-SFM Singlemode Fiber Modules
•
Two DTX-SFM Fiber Modules for testing at
1310 nm and 1550 nm.
•
Two SC/SC adapters
•
Four 9/125 µm singlemode patch cords, 2 m, SC/SC
•
Two 9/125 µm singlemode patch cords, 0.3 m, SC/SC
•
DTX-MFM/GFM/SFM Fiber Modules Users Manual
•
DTX CableAnalyzer Product CD
•
LinkWare Software CD
The patch cords provided are suitable for testing
SC-terminated links. Other patch cords are
required for other connector types or 50 /125
fiber. Many are available as accessories from
Fluke Networks.
4
Note
µ
m
Safety Information
WX
To avoid possible fire, electric shock, or personal
injury read the safety information given in the
DTX Series CableAnalyzer Users Manual.
W *
Warning: Class 1 and Class 2 Laser
Products
To avoid possible eye damage caused by
hazardous radiation:
•
Never look directly into optical connectors. Some
sources produce invisible radiation that can
permanently damage your eyes.
•
Keep the fiber module's OUTPUT port covered
with a dust cap or keep a patch cord attached.
The OUTPUT port may be active even when a
test is not in progress. Covering the port reduces
the risk of accidental exposure to hazardous
radiation.
•
Never start a test or activate the OUTPUT port or
VFL port without first connecting a fiber to the
port you will use.
Warning