Advertisement
Setup
Power up. Insert 2-AA batteries into the sensor, then into the
clock. Observe the correct polarity.
Configure basic settings. Hold the SET button for 3 seconds to
enter settings menu. Use the +/- buttons to adjust and SET to
confirm.
Setting order:
1. Language: English | Español
2. Beep ON | OFF
3. Atomic ON | OFF
4. DST ON | OFF (Daylight Saving Time)
5. Time Zone
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit | Celsius
Note: When Español is selected, weekday and sub menu
instructions will be in Spanish. Calendar order: Day, Month, Year.
English | Español
Atomic ON | OFF
Page | 1
www.lacrossetechnology.com/support
AA
AA
Note: When the Atomic setting
is set to OFF, the menu will skip
to item 6, your Hour setting
Beep ON | OFF
DST ON | OFF
513-1417BS
Time Zone
Time Zone
AST
Atlantic
Eastern
EST
CST
Central
MST
Mountain
PST
Pacific
AKT
Alaskan
HAT
Hawaiian
Minutes
Month
Fahrenheit | Celsius
Place outdoor sensor outside in the shaded location and enjoy
your weather information.
Atomic Time
• The station will automatically search for the atomic time signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the SET button to search manually for atomic time
signal.
• Press the SET button to select daylight saving time ON/OFF. If you
do not observe DST, use the +/- button to turn OFF the Daylight
Saving Time Indicator.
• For information about WWVB visit:
513-1417BS
www.lacrossetechnology.com/support
Hour
Year
Date
Note: When setting the hour,
AM indicates times before 12:00
(noon) and PM indicates time
after 12:00 (noon).
http://bit.ly/AtomicTime
Page | 2
Advertisement
