Pre-Maintenance
Procedures
Lifting the Machine
Use the following as points to lift the machine:
Front of the machine—at the frame of the machine,
forward of the wheel-drive motors
Important:
Do not support the machine at the
wheel-drive motors. Keep the lifting equipment
clear of hydraulic tubing and hoses.
Figure 39
Rear of the machine—at the center of the axle
(Figure
40)
Locate the jackstands of the specified capacity at both
sides of the gear case and under the axle.
Important:
Do not support the machine at the tie
rod.
(Figure
39)
g036670
46
Figure 40
Opening the Hood
Tilt the hood to access the chassis as shown in
41.
Figure 41
g036671
Figure
g036674