Power Button With Fingerprint Reader; Removing The Power Button With Fingerprint Reader - Dell Inspiron 5300 Service Manual

Steps
Place the palm-rest and keyboard assembly on a flat surface.
Next steps
1. Install the touchpad.
2. Install the power-adapter
3. Install the display assembly.
4. Install the system board.
5. Install the speakers.
6. Install the wireless card.
7. Install the 4-cell battery.
8. Install the 3-cell battery.
9. Install the base cover.
10. Follow the procedure in

Power button with fingerprint reader

Removing the power button with fingerprint reader

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 4-cell battery.
4. Remove the 3-cell battery.
5. Remove the wireless card.
6. Remove the speakers.
7. Remove the system board.
NOTE: The system board can be removed with the heat sink attached.
8. Remove the display assembly.
9. Remove the power-adapter
10. Remove the power button with fingerprint
44 Removing and installing components
port.
After working inside your computer.
Before working inside your
port.
reader.
computer.