Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell Precision 5550 Service Manual

10. Install the base cover.
11. Follow the procedure in

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the speakers.
5. Remove the memory.
6. Remove the solid state
7. Remove the solid state
8. Remove the heat sink.
NOTE: The system board can be removed or installed together with the heat sink attached. This simplifies the
procedure and avoids breaking the thermal bond between the system board and the heat sink.
9. Remove the left fan.
10. Remove the right fan.
11. Remove the I/O board.
12. Remove the display assembly.
13. Remove the system board.
About this task
The following image indicates the palm-rest and keyboard assembly and provides a visual representation of the removal procedure.
After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly.
44 Removing and installing components
After working inside your computer.
Before working inside your
drive1.
drive2.
computer.