Removing The Left Fan - Dell Precision 5550 Service Manual

Steps
1. Connect the fan cable to the system board.
2. Slide fan below the heat sink and align the screw holes on fan with the screw holes on the system board and palm-rest and keyboard
assembly.
3. Replace the two screws (M2x4) that secure the fan to the system board and palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in

Removing the left fan

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
The following images indicate the location of the left fan and provide a visual representation of the removal procedure.
26 Removing and installing components
After working inside your computer.
Before working inside your computer.