Ariens Edge Series Operator's Manual page 20

3
2
1. Adjusting Hole
2. Mounting Hole
3. Steering Lever
4. Upper Control Arm
Figure 17
See Figure 18.
6. Loosen lock nut on height-adjustment
bolt.
7. Turn bolt in or out until levers are at the
same height.
8. Tighten lock nut.
1
1. Lock Nut
2. Height-adjuster Bolt
Figure 18
4
1
2
Adjust Steering Level Reach
See Figure 19.
1. Loosen hardware securing steering lever
to upper control arm.
2. Pivot steering lever to desired position.
3. Ensure levers are aligned with each
other.
4. Tighten hardware.
2
1. Steering Lever
2. Upper Control Arm
3. Hardware
EN - 18
3
Figure 19
1