Furuno TZT19F Installation Manual page 30

2. WIRING
PGN
127250 Vessel Heading
127251 Rate of Turn
127257 Attitude
127258 Magnetic Variation
127488 Engine Parameters, Rapid Update
127489 Engine Parameters, Dynamic
127505 Fluid Level
128259 Speed
128267 Water Depth
129025 Position, Rapid Update
129026 COG & SOG, Rapid Update
129029 GNSS Position Data
129033 Local Time Offset
129038 AIS Class A Position Report
129039 AIS Class B Position Report
129040 AIS Class B Extended Position Report
129041 AIS Aids to Navigation (AtoN) Report
129291 Set & Drift, Rapid Update
129538 GNSS Control Status
129540 GNSS Satellites in View
129793 AIS UTC and Date Report
129794 AIS Class A Static and Voyage Related Data
129798 AIS SAR Aircraft Position Report
129801 AIS Addressed Safety Related Message
129802 AIS Safety Related Broadcast Message
129808 DSC Call Information
129809 AIS Class B "CS" Static Data Report, Part A
129810 AIS Class B "CS" Static Data Report, Part B
130306 Wind Data
130310 Environmental Parameters
130311 Environmental Parameters
130312 Temperature
130313 Humidity
130314 Actual Pressure
130316 Temperature, Extended Range
130577 Direction Data
130578 Vessel Speed Component
Output PGN
The CAN bus output PGN setting (found under the [Initial Setup] menu) is global to the
network. Note that only one TZT19F will output CAN bus data on the network at a time:
the TZT19F which is powered ON first. If that display is turned OFF, another will take
its place to output the data.
PGN Description
059392 ISO Acknowledgment
059904 ISO Request
2-8
Description
Remarks
For Certification, Refusing output requirement
For Certification, Requiring output
Output cycle (msec)