Mercury 565 Manual page 70

12. Tighten the bilge drain plug.
13. Remove the oil filler cap. Add oil to bring the level up to, but not over, the
"FULL" mark on the dipstick.
IMPORTANT: Always use the dipstick to determine exactly how much oil is
required.
a
Tube Ref
Description
No.
25W-50 Synthetic
Blend 4-Stroke
Racing Engine Oil
DRIVE UNIT OIL (BRAVO ONE XR MODELS)
Mercury Racing Gear Lube is now available for use in your drive unit. This oil
will increase the service life of your drive unit when used in place of other oils.
Do not mix Mercury Racing Gear Lube with any other oil.
1. Remove the propeller, place the drive unit in full down position, remove
the oil fill/drain screw and sealing washer, and drain the oil.
a
2. Remove the oil vent screw and sealing washer. Allow the oil to drain
completely.
MAINTENANCE
a - Crankcase oil filler cap
7899
Where Used
Crankcase
a - Oil fill/drain plug
7986
58
Part No.
8M0078013
eng