Advertisement
CLEANING INSTRUCTIONS
Cleaning The Strainer - Monthly or As Needed
1
Turn off the water supply valve on the back of the unit.
Open one of the dispensing faucets to relieve pressure in
the tubing system.
2
Tilt the dispenser on its side.
3
Locate the strainer cap, located on the bottom of the
water supply valve. Use a pair of pliers to grab the
valve housing while removing the strainer cap with an
adjustable wrench.
4
Remove the wire strainer and clean any debris out of the
valve housing.
5
Use a spiral bristled brush to clean inside the strainer.
6
Rinse the strainer and reinsert it into the valve housing.
7
Replace the strainer cap.
8
Tilt the unit back into place and turn on the water supply
valve.
TCC, CLEANING INSTRUCTIONS
CI25
Valve
housing
Strainer
Cap
Turn off
valve
051619A
Advertisement
