Advertisement
CLEANING INSTRUCTIONS
NOTICE - Do not use cleaning liquids, compounds or powders containing chlorine (bleach) or corrosives.
THE WARRANTY. Do not immerse the unit in water or any other liquid.
Daily Cleaning
1
Prepare a mild cleaning solution of dish washing detergent and warm water.
2
Wipe any spills, dust or debris from the exterior surfaces, with a damp cloth.
Apply a stainless steel polish to prevent scratches.
3
Turn off water supply at valve behind unit.
4
Open the dispensing faucet to relieve pressure in the dispensing lines.
5
Remove the top cover and clean with the cleaning solution.
6
Clean the faucet assembly:
•
Remove the handle/seat cup assembly from the faucet by holding the
bonnet and unscrewing.
•
Clean the bonnet and silicone seat cup assembly.
•
Use a spiral brush soaked in cleaning solution to clean inside the faucet
body.
•
Run the brush through the adapter on the body of the dispenser.
7
Rinse and dry parts that were removed. Assemble the dry parts onto the unit.
Weekly Cleaning and Sanitizing
Use a concentrated cleaning solution to simplify the cleaning procedure. This procedure requires a one gallon
container of a cleaning solution containing hot water and a granulated concentrated cleaner (a cleaner like Coffee
Dispenser Cleaner Corporation #12580, Urnex or equivalent) and a one gallon container of clean hot water.
1
Turn on water supply to the dispenser.
2
Remove the quick disconnect from the tea
concentrate bag.
3
Pull the cap off of the QCD (see detail drawing) and
place this end of the line into the container containing
the cleaning solution.
4
Place a large empty container under the dispenser
faucet.
5
Open the front faucet and dispense at least half of the
cleaning solution.
6
cleaning solution.
TCC, CLEANING INSTRUCTIONS
continued...
USE OF THESE PRODUCTS WILL VOID
Bonnet
Seat cup
To mixing
valve
CI25
QCD
Cap
Mix cleaner in
1 gallon hot
water
052119A
Advertisement
