Advertisement
OPERATING INSTRUCTIONS
Setting the Pressure Regulator
NOTICE - Do not exceed 25 psi (static). Equipment failure or leakage will result.
IMPORTANT -
is properly set, then adjust the taste/brix level using the Mixing Valve Adjustment instructions.
The purpose of the regulator is to provide uniform water pressure, so that the mixing valve can produce a stable
and uniform blend of concentrate and water, and also to protect the hydraulics of the dispensing unit from
excessive line pressure.
1
Tilt the dispenser on its side.
2
Locate the regulator adjustment knob and turn it until the pressure level on the gauge reads 15 psi.
TCC, OPERATING INSTRUCTIONS
OI43
030218NC
Advertisement
