Servicing The Roller - Toro Reelmaster 5010 Series Operator's Manual

16. Repeat this procedure on the other end of the
cutting unit.
17. Adjust the bedknife to the reel; refer to
the Bedknife to the Reel (page
1. Roller Rebuild Kit (Part No. 114-5430)
2. Roller Rebuild Tool kit (Part No. 115-0803)
3. Inner seal
4. Bearing
5. Outer seal

Servicing the Roller

The Roller Rebuild Kit (Part No. 114-5430) and the
Adjusting
Roller Rebuild Tool Kit (Part No. 115-0803)
7).
35) are available for servicing the roller. The Roller
Rebuild Kit includes all the bearings, bearing nuts,
inner seals, and outer seals to rebuild a roller.
The Roller Rebuild Tool Kit includes all the tools and
the installation instructions required to rebuild a roller
with the roller rebuild kit. Refer to your parts catalog or
contact your authorized Toro distributor for assistance.
Figure 35
6. Bearing nut
7. Inner seal tool
8. Washer
9. Bearing/outer-seal tool
20
(Figure
g007790