KTM 250 EXC TPI 2020 Owner's Manual page 87

Main work
–
Unplug connector
–
Remove tube
S03485-10
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Disconnect the quick release coupling.
Info
E00880-10
Remaining fuel may flow out of the fuel hose.
–
Mount wash cap set
Wash cap set (81212016100)
–
Remove screws
(All EXC models)
–
Hang the horn and horn bracket to one side.
E00881-10
–
Remove screw
E00882-10
–
Pull both spoilers off laterally from the radiator mount and lift
off the fuel tank.
E00883-10
SERVICE WORK ON THE CHASSIS 12
1
of the fuel pump.
2
from the fuel tank breather.
3
.
4
with the collar bushings.
5
with the rubber bushing.
85