KTM 250 EXC TPI 2020 Owner's Manual page 145

Main work
–
Pull the EFI control unit
hang to the side.
–
Remove protection cap
S03510-10
–
Put throttle grip
S03511-10
–
Plug in wake-up connector
diagnostics connector
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcycle's
separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing means from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated at various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump working.
–
Disconnect the wake-up connector from the diagnostics con-
nector.
S03512-10
SERVICE WORK ON THE ENGINE 18
1
upward off the rubber plugs and
2
of the diagnostics connector.
3
into full throttle position and secure.
4
for priming the oil pump to the
5
.
143