Safety Notices; Product Safety Certification; Safety Warning - Watchguard XCS Series Hardware Manual

Legal and Regulatory Information

Safety Notices

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Please read the following
instructions carefully before operating the product, and refer to them as needed to ensure the continued safe
operation of your product.

Product Safety Certification

The WatchGuard product is safety certified under the following standards:

CAN/CSA C22.2 No.60950-1-07+A1:2011

IEC 60950-1+Amd1 2nd Edition (2005)

UL 60950-1:2007 R12.11

EN 60950-1:2006+A11+A1+A12

Safety Warning


Do not place objects on the power cord.

Do not obstruct the ventilation openings. These openings prevent overheating of the machine.

Never push objects of any kind into slots or openings on this equipment. Making a contact with a
voltage point or shorting out a part may result in fire or electrical shock.

When removing or installing an appliance, follow the general installation safety instructions.

If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged
into an approved three-contact electrical outlet with the grounding wire connected to an electrical
ground (safety ground) at the power outlet.

The Lithium Battery used in the security appliance may not be replaced by the user. Return the
appliance to a WatchGuard authorized service center for replacement with the same or equivalent
type recommended by the manufacturer. If, for any reason, the battery or security appliance must be
disposed of, do so following the battery manufacturer's instructions.
HINWEISE ZUR SICHERHEIT
Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu
erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale Compliance-
Standards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt, und bezeichnen sie
als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten.
Product Safety Certification
Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert:

CAN/CSA C22.2 No.60950-1-07+A1:2011

IEC 60950-1+Amd1 2nd Edition (2005)

UL 60950-1:2007 R12.11

EN 60950-1:2006+A11+A1+A12
Sicherheitshinweis

Legen Sie keine Gegenstände auf das Netzkabel.

Verdecken Sie nicht die Lüftungsöffnungen. Diese Öffnungen verhindern eine Überhitzung der
Maschine.
12