BenQ G Series User Manual page 39

Item
Custom Key
Sets the function to be accessed by custom key 1.
1
Custom Key
Sets the function to be accessed by custom key 2.
2
Custom Key
Sets the function to be accessed by custom key 3.
3
DDC/CI
Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
HDMI Auto
When this function is activated, HDMI port will be in the
Switch
input auto select loop. Otherwise, HDMI can only be
(for models
selected by input select or by hot key.
with HDMI
inputs)
Auto Power
Sets the time to power off the monitor automatically in
Off
power saving mode.
Resolution
Sets whether to display the resolution notice of the
Notice
recommended resolution when a new input source is
detected by the monitor.
Information
Displays the current monitor property settings.
Function Range
Picture Mode
•
Low Blue
•
Light Low
/
Blue Light
Plus
(*)
Display Mode
•
Brightness
•
Contrast
•
• Auto
Adjustment
Volume
• (for
models with
speakers)
Mute
•
Input
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF
•
• Input
• Current
Resolution
Optimum
•
Resolution
(best with the
monitor)
Model Name
•
Navigating the main menu 39