Hot Tub Maintenance; Cleaning The Filters - Dimension One Spas BAY Series Owner's Manual

Table of Contents

Advertisement

BAY Collection

13.0 Hot tub Maintenance

Proper and regular maintenance of your hot tub will help it retain its
beauty and performance. Your authorized Dimension One Spas dealer
can supply you with all the information, supplies, and accessory products
you will need to accomplish this.
DANGER:
!
BY ENTRAPMENT!
Keep hair, loose articles of clothing or hanging jewelry away
from suction fittings, rotating jets or other moving components to
avoid entrapment that could lead to drowning or severe injury.
Never use the hot tub unless all suction guards, filter, filter lid,
or skimmer assembly are installed to prevent body and/or hair
entrapment.
Never operate or use the hot tub if the filter, filter lid, or skimmer
assembly are broken or any part of the skimmer assembly is
missing. Please contact your dealer or nearest service center
for service.
The suction fittings and suction covers in this hot tub are sized
to match the specific water flow created by the pump(s). If it
is necessary to replace the suction fittings, suction covers or
pump(s), be sure that the flow rates are compatible and are in
compliance with the VGB Safety Act, page 6.
Never replace a suction fitting or suction cover with one rated
less than the flow rate marked on the original suction fitting.
Using improper suction fittings or suction covers can create
a body or hair suction entrapment hazard that may lead to
drowning or severe injury.
Owners must alert all hot tub users to the potential risk of Hair,
Limb, Body, Evisceration (disembowelment), and Mechanical
Entrapment, page 6.
13.1

Cleaning the filters

IMPORTANT: To prevent debris from getting into the system during
filter cleaning, D1 recommends that you shut off the power at the
GFCI or enter "Standby Mode," page 34.
A. Cleaning the Filter Cartridges
Your system has two filters. To remove and clean the filters, follow
these steps. We recommend that you clean the filters once a month as
preventative maintenance. Every other cleaning, soak the filters in filter
cleaning solution and rinse thoroughly.
1. Turn the breaker, to the hot tub, OFF or put the hot tub in "Stand
By" mode!
2. Access the filter under the skimmer basket, Figure 13.1a, lift the
center float off the skimmer assembly until fully extended. Turn
Page 38
RISK OF SEVERE INJURY OR DROWNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amore bayLotus baySarena bay

Table of Contents