Touchpad Button Board - HP 17 Series Maintenance And Service Manual

TouchPad button board

Table 6-11 TouchPad button board and cable descriptions and part numbers
Description
TouchPad button board
TouchPad button board cable
Before removing the TouchPad button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the TouchPad button board:
1. Disconnect the cable from the ZIF connector on the TouchPad button board (1).
2. Lift the cable to remove it from the adhesive that secures it to the board (2).
3. Remove the two Phillips M2.0 × 2.0 screws (3) that secure the board to the computer.
4. Remove the TouchPad button board from the computer (4).
Reverse this procedure to install the TouchPad button board.
52 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 40).
33).
37).
Spare part number
L22539-001
L22523-001
32).