Solid-State Drive - HP 17 Series Maintenance And Service Manual

Solid-state drive

Table 6-5 Solid-state drive descriptions and part numbers
Description
256 GB, PCIe, NVMe
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the solid-state drive:
▲ Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the solid-state drive.
46 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 40).
33).
37).
Spare part number
L22730-001
L22729-001
L22728-001
32).