Shutdown - Fortinet FortiGate FortiGate-500A Administration Manual
Fortinet fortigate fortigate-500a: user guide
Hide thumbs
Also See for FortiGate FortiGate-500A:
- Install manual (56 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Shutdown
Shutdown
132
You can use the Maintenance page to log out, restart and shut down the FortiGate
unit.
Figure 48: System shut down
To log out of the system
1
Go to System > Maintenance > Shutdown.
2
Select Logout.
3
Select Apply.
The FortiGate unit logs out.
To restart the system
1
Go to System > Maintenance > Shutdown.
2
Select Reboot.
3
Select Apply.
The FortiGate unit restarts.
To shut down the system
You can restart the FortiGate unit after shutdown only by turning the power off and
then on.
1
Go to System > Maintenance > Shutdown.
2
Select Shutdown.
3
Select Apply.
The FortiGate unit shuts down and all traffic flow stops.
To reset the FortiGate unit to factory defaults
Use the following procedure to reset system settings to the values set at the factory.
This procedure does not change the firmware version or the antivirus or attack
definitions.
!
Caution: This procedure deletes all changes that you have made to the FortiGate configuration
and reverts the system to its original configuration, including resetting interface addresses.
1
Go to System > Maintenance > Shutdown.
2
Select Reset to factory default.
01-28006-0100-20041105
System maintenance
Fortinet Inc.
Advertisement
Table of Contents
