Input - Canon WUX5000 User Commands

INPUT

Input selection
Format
INPUT=<Input selection parameters:ID>
GET□INPUT / ?△INPUT
<Input selection parameters:ID>
D-RGB
A-RGB
COMP
HDMI
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET INPUT ?INPUT
'g:INPUT=<Input selection parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This controls the input selection.
(2) This command is identical to pressing the "INPUT" button on the remote control.
(3) The input can be selected automatically using the auto setup command
(AUTOSETEXE=INPUT).
(4) The current input can be acquired using the applicable GET command. ("
Example
Setting
> INPUT=HDMI
< i:OK
Reference
> GET INPUT or ?INPUT
< g:INPUT=A-RGB
* Commands are indicated by ">", and responses are indicated by "<".
Digital PC
Analog PC
Component
HDMI
Input
A-RGB COMP HDMI None
-
', current input selection is returned as
The input is set to HDMI.
This retrieves the input signal.
- 44 -
WUX5000 / WUX4000 User Commands
GET INPUT
")