Rgboffset - Canon WUX5000 User Commands

RGBOFFSET

RGB offset adjustment
Format
RGBOFFSET=<R offset setting:Number>▽<G offset setting:Number>▽<B offset
GET□RGBOFFSET /
Setting values for <R/G/B offset setting:Number> are -60 to 60.
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET RGBOFFSET ?RGBOFFSET
'
g:RGBOFFSET=<R offset setting:Number>,<G offset setting:Number>,<B offset setting:Number>
For details on other responses, refer to the "Error List".
Description
(1) This command is used to adjust the offset of the R, G and B colors.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Offset adjustment" are selected on the menu.
(3) If numerical parameters are outside the range, "
(4) This sets the currently selected input signal and image mode.
(5) The current RGB offset values can be obtained using the GET command. ("
Example
Setting
> RGBOFFSET=10, 11, 12
< i:OK
Reference
> GET RGBOFFSET or ?RGBOFFSET
< g:RGBOFFSET=-10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".
setting:Number>
?△RGBOFFSET
Input
A-RGB COMP HDMI None
-
', current RGB offset adjustment values are returned as
The R offset is set to 10, G offset to 11 and B offset to 12.
The RGB offset values are obtained.
- 57 -
WUX5000 / WUX4000 User Commands
" is returned.
e:0801 INVALID_VALUE
'
")
GET RGBOFFSET