Ambadj - Canon WUX5000 User Commands

AMBADJ

Ambient light correction adjustment ON / OFF
Format
AMBADJ=<Ambient light correction adjustment parameter:ID>
GET□AMBADJ / ?△AMBADJ
<Ambient light correction adjustment parameter:ID>
ON
OFF
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if ON / OFF of ambient light correction adjustment was set properly.
For ' ' or '
GET AMBADJ ?AMBADJ
'
g:AMBADJ=<Ambient light correction adjustment parameter:ID>
For details on other responses, refer to the "Error List".
Description
(1) This command is used to select ON or OFF for the ambient light correction adjustment.
(2) This command functions in the same way as when "Image adjustment" - "Advanced
adjustment" - "Ambient light" are selected on the menu.
(3) In the case of "Ambient light correction adjustment", set the level using AMB_LEVEL of
"Ambient light level" command, and set the type using AMB_TYPE of "Ambient light type"
command.
(4) This sets the currently selected input signal and image mode.
(5) The current ambient light correction adjustment setting can be obtained using the GET
command. ("
GET AMBADJ
Example
Control
> AMBADJ=ON
< i:OK
Reference
> GET AMBADJ or ?AMBADJ
< g:AMBADJ=ON
* Commands are indicated by ">", and responses are indicated by "<".
This sets the ambient light correction adjustment to ON.
This sets the ambient light correction adjustment to OFF.
Input
A-RGB COMP HDMI None
-
', current ambient light correction adjustment setting is returned as
")
The ambient light correction adjustment is set to ON.
The ambient light correction adjustment ON or OFF setting is obtained.
- 16 -
WUX5000 / WUX4000 User Commands
'