Step 3 Select An Input Signal - Canon 4K6021Z User Manual

Projection Procedure

Step 3 Select an Input Signal

To switch between signals from connected devices, select an input signal in the
[Input] menu.
The selected signal changes each time you press the INPUT button, or each time
you press the [ ] / [ ] buttons when the [Input] window is shown.
The currently active input signal is marked with a green circle and enclosed by a
orange border.
Names of input signals available for projection are displayed in white, and
unavailable signal names are grayed out.
Projector
• Input signals can also be selected by using the INPUT A-C buttons on the remote
control, depending on settings. For details, see "[INPUT A-C] button settings" (P145).
• Using the projector's multi-input feature, you can supply a single image via two cables.
As sources of input for projection at 4K or other resolutions, choose [DP 1x2].
• Signals you supply for Multi Input mode must meet certain conditions.
INPUT button
INPUT button
Remote control
42