Ambadj - Canon WUX6000 User Commands

AMBADJ

Ambient light correction adjustment ON/OFF
Format
Setting Command
Response
Reference Command
Response
< Ambient light correction adjustment parameter:ID >
Parameter
ON
OFF
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON
No No No No Yes
Remarks
(1) Ambient light level and "Ambient light type" settings take effect on the displayed image when
"Ambient light correction" is activated.
To adjust the "Ambient light level" or "Ambient light type", use "AMBLEVEL" or "AMBTYPE"
command, respectively.
(2) This sets the currently selected input signal and image mode.
Example
(Control)
> AMBADJ=ON
< i:OK
(Reference)
> GET=AMBADJ
< g:AMBADJ=ON
Note: '>' indicates a command; '<' indicates a response.
AMBADJ=<Ambient light correction adjustment parameter:ID>
i:OK
GET=AMBADJ
g:AMBADJ=<Ambient light correction adjustment parameter:ID>
Note: See "Error list" for any response other than the above.
Adjusted
Turned off
RS-232C
ST PM ON D-RGB
No No Yes Yes
-21-
WUX6000 User Commands
Meaning
Input
A-RGB COMP HDMI
Yes Yes Yes
LAN USB None
Yes Yes Yes