Dukane 8950W User Manual page 56

SCREEN menu
It e m
S O UR C E NA M E
(continued on next page)
5 6
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE
NAME and press the ► or E NTE R button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. The
SOURCE NAME dialog will be displayed.
Right side of the menu is blank until a
name is specified.
(3) Select an icon you would like to assign to
the port in the SOURCE NAME dialog.
The name assigned to the port will also
be automatically switched according to
your icon selection. Press the E NTE R or
INPUT button to determine your icon selection.
(4) Select a number you would like to assign
to the port along with the icon. You can
select the number either from blank
(no number assigned), 1, 2, 3, or 4.
Then press the E NTE R or INPUT button.
(5) If you would like to modify the name
assigned to the port, select CUSTOM
NAME and press the E NTE R or INPUT
button.
(continued on next page)
D e s c r i p t i o n