Dukane 8950W User Manual page 45

It e m
R E S O L UTIO N
M H L S TA ND B Y
PW R .
The resolution for the C O M PUTE R IN1 and C O M PUTE R IN2 input
signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼
buttons and press the ► button.
The RESOLUTION menu will be
displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using
the ▲/▼ buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
(3) Pressing the ► or E NTE R button when
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and
horizontal size.
The INPUT_INFORMATION dialog will be
displayed.
(4) To set a custom resolution use the ▲/▼ buttons to select
the CUSTOM and the RESOLUTION_CUSTOM box will be
displayed.
Set the horizontal (HORZ) and
vertical (VERT) resolutions using
the ▲/▼/◄/► buttons.
This function may not support all
resolutions.
(5) Move the cursor to OK on screen and press the ► or E NTE R
button. The message "ARE YOU SURE YOU WISH TO
CHANGE RESOLUTION?" appears. To save the setting, press
the ► button.
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
The INPUT_INFORMATION dialog
will be displayed.
(6) To revert back to the previous resolution without saving changes,
move the cursor to CANCEL on screen and press the ◄ or
E NTE R button.
The screen will then return to the RESOLUTION menu displaying
the previous resolution.
• For some pictures, this function may not work well.
Using the ▲/▼ buttons switches the MHL STANDBY PWR. ON/OFF.
ON ó OFF
・When the STANDBY MODE is set to
the MHL STANDBY PWR. menu can not be operated and MHL
power feeding is unavailable with standby mode.
・When the MHL STANDBY PWR. is set to ON, there may be some
noise with standby mode. This is not malfunction.
D e s c r i p t i o n
SAVING/NETWORK(
INPUT menu
STANDARD
↓
CUSTOM
↓
WOL),
4 5