Removing docomo nano UIM
card
Remove the cover of docomo nano
1
UIM card/microSD card slot (P.26).
Pull the tray straight out from the
2
terminal. (P.32).
Remove the docomo nano UIM
3
card from the tray.
docomo nano UIM card
Insert the tray into the terminal
4
and press it straight into the slot.
Be careful about the direction to insert
・
of the tray.
5
The internal battery is not fully charged at the
time of purchase.
・
The charging time varies by the internal
Tray
battery condition or operating environment.
・
Continuous
stand-by
time
Continuous
call time
Tray
Firmly press until the tray is all the
way in, and make sure that there
are no gaps between the terminal
and cover (P.32).
Charging
Estimated charging time (P.224)
Operation time on full charge
(estimate)
"Continuous standby time", "Continuous call
time" (P.226)
FOMA/3G Stationary (Auto) : Approx.
GSM
LTE
FOMA/3G Approx. 850 min.
GSM
VoLTE call
(voice)
Before Using the Terminal
650 hours
Stationary (Auto) : Approx.
480 hours
Stationary (Auto) : Approx.
590 hours
Approx. 740 min.
VoLTE : Approx. 1,350 min.
VoLTE (HD+) : Approx. 1,150
min.
33