x
Microphone
y
USB Type-C jack
*1 A sticker bearing
purchase.
*2 The antenna is built into the terminal. Covering
around the antenna with your hand may affect the
quality of communications.
*3 A sticker bearing the CE mark, FCC ID, IMEI
information, etc. is attached. Please do not peel off
the sticker or remove the nameplate.
❖ Note
Do not put a sticker or other material on the
・
proximity/light sensor, laser AF sensor, or RGBC-IR
sensor.
The back cover cannot be removed. Attempting to
・
remove the back cover with excessive force may
cause damage or malfunction.
The battery is built into the terminal and not removal.
・
docomo nano UIM card
The docomo nano UIM card is an IC card
recorded user information such as your
phone number etc.
You can use the terminal with a docomo nano
・
UIM card. If you have a docomo mini UIM card,
UIM, or FOMA card, bring it to a docomo Shop
to replace it with a docomo nano UIM card.
When docomo nano UIM card is not inserted
・
to the terminal, making calls, packet
communication, etc. are not available.
mark is attached at the time of
For details on the docomo nano UIM card,
・
refer to the docomo nano UIM card manual or
NTT DOCOMO website.
If a microSD card is installed, be sure to
・
unmount it (to disable reading/writing)
before installing or removing a docomo nano
UIM card (P.189).
Opening/closing the cover of docomo nano
・
UIM card/microSD card slot (P.26).
Security codes of the docomo nano
■
UIM card
The docomo nano UIM card has a security
code called a PIN code. The code is set to
"0000" at subscription, which you can
change by yourself (P.175).
❖ Information
Please be careful not to touch or scratch the IC when
・
you handle the docomo nano UIM card. Doing so
may cause malfunction or damage.
Inserting docomo nano UIM
card
Remove the cover of docomo nano
1
UIM card/microSD card slot (P.26).
Before Using the Terminal
31