Battery And Maintenance; Charging Your Device - Sony Xperia XA1 Ultra User Manual

Battery and maintenance

Charging your device

Always use an original Sony charger and USB Type-C™ cable intended for your specific
Xperia™ model. Other chargers and cables may increase charging time, not charge at all, or
may even damage your device. Make sure all USB ports and connectors are completely dry,
before inserting the USB Type-C™ cable.
A wall socket charger will charge your device faster than charging via your computer.
You can still use your device while charging.
If the battery is depleted, it may take up to 30 minutes for your device to respond to
the charging. During this time, the screen may remain completely dark, not showing
the charging icon. Also note that it can take up to 4 hours for a completely drained
battery to be fully charged.
Your device has an embedded, rechargeable battery that can only be replaced by an
authorised Sony repair centre. You should never try to open or take apart the device yourself.
Doing so can cause damage and void your warranty.
To charge your device
1
Plug the charger into a power outlet.
2
Plug one end of the USB Type-C™ cable into the charger (or into the USB port
of a computer).
3
Plug the other end of the cable into the USB Type-C™ port on your device. The
notification light illuminates when charging begins.
4
When the device is fully charged, disconnect the cable from your device by
pulling it straight outwards. Make sure not to bend the connector.
It is important to use the USB Type-C™ cable (provided) when charging your device as other
types of USB cables can damage your device.
If the battery is completely depleted, it may take a few minutes before the notification light
illuminates and the charging icon appears.
This is an internet version of this publication. © Print only for private use.
33