Factory Defaults; Backup & Restore - TP-Link AC1200 User Manual

Chapter 4
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to System Tools
4. Click Choose File
4 17 6

Factory Defaults

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
default values.
• The default Username: admin
• The default Password: admin
• The default IP
• The default Subnet
4 17 7 Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
> Firmware Upgrade.
to locate the downloaded firmware file, and click Upgrade.
> Factory Defaults. Click
Address: 192.168.0.1
Mask: 255.255.255.0
> Backup & Restore.
Configure the Router
Restore to reset all settings to the
67