Dhcp - TP-Link AC1200 User Manual

Chapter 4
3 Select the band and enable the
4 Create a network name for your guest network.
5 Set the Max Guests
6 Select the Security
7 Set the guest network permissions:
• Allow Guest To Access My Local Network
local network and manage it.
• Guest Network Isolation
• Guest Network Bandwidth Control
Control rules will take effect.
8 Click Save.
Note:
The range of bandwidth for guest network is calculated according to the setting of Bandwidth Control on the
Bandwidth Control > Control Settings
4 7

DHCP

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
Guset Network
number.
type and create the
- If enabled, guests are isolated from each other.
- If enabled, the Guest Network Bandwidth
page.
function.
Password of the guest network.
- If enabled, guests can access the
Configure the Router
35