Communication Programs And Settings - Videonics AB-1 Edit Suite User Manual

Communication Programs and Settings

Edit Suite can communicate with most communication software programs that support XOn/XOff
Flow Control. The table on the following page identifies three communication programs we have
tested with Edit Suite, and the settings for each. Adapt these settings to your software package.
Computer
Communications Program
Communications Menu
Method
Driver
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Parity Check
Carrier Detect
Text Transfer
End Outgoing Lines with:
Save Text As:
Wait for Echo
Flow Control
ASCII Transfer
Echo Local
Expand Blank Lines
Pace Characters
Character Pacing
Line Pacing
Down Loading
CR
LF
Up Loading
CR
LF
Terminal Emulation
Terminal Preferences
Line Wrap
Local Echo
Sound
CR->CR/LF
Inbound
Outbound
Transfer/Send Menu
Protocol
Ensure that all settings are correct before you begin communicating with Edit Suite. Test by running
Edit Suite's Export function without saving the data that is sent. You should see 255 lines of 32
characters per line scroll down your PC display. If not, either some of the above values are not set
properly or your modem/communications port is not configured for computer-to-computer
communications. Consult your PC or communication manuals for more information.
Communication Programs and Settings
Macintosh
MicroPhone II
Microphone Std.
Standard
19,200
8
None
1
XOn-XOff
CR
Teach Text
None
ASCII/Text
PC DOS
ProComm
Press Alt-P and
select table 12.
19,200
19,200
8
8
None
None
1
1
XOn-XOff
(blank)
(blank)
Standard
Press Alt-S,
select menu 6.
Yes
Yes
0
23
11
None
None
None
None
DEC VT-100 or DEC VT-52
X
X
X
(blank)
(blank)
PC Windows
Terminal