Key Reference; Creating/Updating Events - Videonics AB-1 Edit Suite User Manual

Reference by Function:

Creating/Updating Events

To create ...
Any Event
Scene Event, empty
Scene Event, with In or Out Time
Scene Event, with In or Out Time
Scene Event with In Time and Start the
Recorder
(Assemble Edit)
Source Event, ABCD
Source Event, MX-1 Color
GPI-T Event, Fixed with Time Code
MX1, MIXER or GPI-M Event
(Depends on setting for GPI-M in
Setup/Config)
Insert Event
Split Event

Key Reference

Press ...
[NEW], move cursor to type, [OK]
[SHIFT]+[A/B/C/D] for any source whose PROTO
is not NONE.
Select source, press [SHIFT]+[IN/OUT]
If current source (steady LED) is different than the
source for active EDL event—press [IN] or [OUT].
If current source is the same as the source for the
active event,pressing [IN] or [OUT] updates time
codes in the active event.
[REC]
(Then press [OUT] to pause recorder and fill in the
OUT time.)
[SHIFT]+[A/B/C/D] for any source whose
PROTO=NONE
[SHIFT]+[COLOR]
[GPI-T]
If the current source (steady LED) is different than
source for the active EDL event, a scene event is
created ahead of the GPI event.
[GPI-M]
If the GPI-M port is configured for MX-1 or MIXER,
and if active event is the last event in the EDL, the
MX1/MIXER Event is followed by a new scene
event.
If the GPI-M port is configured for GPI, and if the
current source (steady LED) is different than source
for the active EDL event, a scene event is created
ahead of the GPI event.
[INSERT], or press [R] then [IN] or [OUT].
[SHIFT]+[SPLIT/INSERT] (but only if it follows an
INSERT event).