Copying Events - Videonics AB-1 Edit Suite User Manual

When [SHIFT]+[CUT] is pressed (Step 1), all the events in the group are deleted from the EDL
and placed into a temporary storage location, called the paste buffer. They remain in the paste
buffer until [PASTE], [CUT] or [COPY] is pressed.
When [PASTE] is pressed (Step 3), the entire group of events is pasted after the active event. If
[SHIFT]+[PASTE] is pressed instead of [PASTE], the group is pasted before the active event.
Caution: Each time [CUT] or [COPY] is pressed, any events already in the paste buffer are
deleted before the new events are added. If you inadvertently press [SHIFT]+[CUT] a second
time before pressing [PASTE], the group of events you wanted to move will be deleted.
Notice the order of the events in the third column. Event 002 retained its old event number
instead of causing the entire list to be renumbered. This way, you can keep track of events by
their original event numbers no matter where they are located in the EDL. If you want to
renumber the events so that the event number matches the event's position in the EDL, press [GO
TO]+[SHIFT]+[CHG].

Copying Events

There may be occasions when you want to use the same event in more than one location in your
production. This section provides procedures for copying individual events and groups of events and
pasting the copies in a different location in your EDL.
To Make a Copy of an Event–
1. Display the
event to be
copied and
press [COPY].
2. Display the
new location
for the copied
event.
3. Press
[PASTE].