Cal Spas Hot Tub Wifi App - Cal Spas Home Resort Z-524L Owner's Manual

Cal Spas Hot Tub WiFi App

The Cal Spas Hot Tub Wifi app can provide you with instant access and conrol of your spa wherever you connect
within the spa's Wi-Fi range. This optional feature is available for use with any smart device (Android
systems only). You must have the wifi module installed in your spa in order to use the app. It is only available
for spas with the BP501 or BP2000 control box.
Spa owners who do not have this feature installed on their spa at the factory can order it as an after-market
item.
Installing the app
Go to the Apple app store or Google Play and search for the free spa app using the key words
"Cal Spas Hot Tub." Select the app. The icon for the app will appear on your device as shown
at left.
Make sure you enable wifi on your phone before you run the app.
On the wi-fi connections screen on your device, a network will appear called "BWGSpa_
xxxxxx_". (The x's represent the wi-fi module's local address and is unique for every spa.) Once you are
connected to the network, start the Cal Spas app and follow the prompts on the screen. (Your start screen
maybe different.)
1. Tap the app button on the main screen of your device.
2. Connect to the spa's wifi signal.
3. When connected, you will be taken
to the main app screen.
4. You are now directly connected to
your hot tub and can control all
the hot tub functions via the app.
Troubleshooting connection problems
You should have few problems connecting with the wi-fi app. However, if you are unable to connect quickly
and easily to the spa's wifi source, try doing the following.
• Enable wi-fi on your device
Check your devices wifi settings and try connecting again.
• Power cycle the spa. Shut off power to the spa for 30 second and turn it back on. Wait until the spa has
gone through its complete set-up routine before you try to connect with the wifi app.
• Wait until the spa has completely primed
which is followed by temperature polling, where no temperature is shown on the control panel. As soon
as a temperature appears, you can connect with the wifi app.
• If you use your home network router, it MUST be close enough to the spa in order for the spa's wi-fi signal
to reach the router. If you have connectivity problems, you may need to relocate your router closer to
your spa or consider adding a wireless signal booster to your router.
2015 Portable Spa
LTR20151001, Rev. A
. This is the most likely reason you may not be able to connect to the app.
. When you turn on the spa, it will go through a priming routine,
29
or iOS
™ ™
www.calspas.com