Swann PRO Series Instruction Manual page 8

Controlling the OSD menu
3
1
Don't forget, to access the PTZ controls, select your
camera and the camera toolbar will appear (as seen be-
low). Then, choose the PTZ button (highlighted) to open
the PTZ controls to get started.
The OSD menu is controlled by the PTZ controls on your DVR (as seen
above). The Iris+ button (1) on your recorder serves as the menu activate
button, as well as your 'Enter' button inside the menu. You will see the
CR (2) icon whenever you can use the 'Enter' (Iris+) button to access a
sub-menu.
The left and right PTZ control buttons (3) are used to change the option
you currently have selected, when there are arrows (4) on a menu op-
tion.
As mentioned previously, the joystick also can be used to control the
menu. Don't forget that pressing in on the joystick functions as your 'En-
MAIN MENU
AE
WB
DAY-NIGHT
VIDEO SETTING
LANGUAGE
RESET
SAVE-EXIT
EXIT
ter' key and the left and right movement will change options with arrows
(4) on a menu option.
The Zoom, Focus and Speed functions have no effect when using the
"FLB" or "FLD" camera as they are fixed lens.
The "ZLB" and "ZLD" camera models have an electronic zoom
autofocus lens and support zoom and focus using the Coaxitron
or RS-485 system depending on the type of DVR you have, use
the DVR controls as shown to zoom the lens in and out and
manually control focus if needed.
2
ENGLISH
4
4