Swann PRO Series Instruction Manual page 14

Video Setting (cont.)
Format (PAL-NTSC):
The reason for this option is mainly for indoor
mounted cameras. Artificial lighting flickers slightly at the frequency
of mains power which the cameras are able to see and shows on your
screen as a flickering image. The correct setting here will eliminate any
flicker produced by artificial lighting. For USA and Canada select NTSC,
for AU, UK and most of Europe select PAL.
NB: If you are using the camera with an analog recorder (960H signal
output), then you will need to be sure that you have the correct PAL or
NTSC mode selected here for your region or DVR setting. Having the
wrong selection can result in a poor quality black and white signal being
VIDEO SETTING
CONTRAST
SHARPNESS
COLOR GAIN
DNR
FORMAT
WDR
RETURN
seen by the DVR or in some cases no signal at all.
WDR:
sures and average the result. This will reduce the impact of different
light levels on the image, causing dark areas to be brighter and reduc-
ing the flaring of exceptionally bright areas. This setting may increase
the amount of noise (static) on the image.
Return:
Note:
controls, please consult the camera and DVR instruction manuals avail-
able at our website.
4
6
10
3
PAL
OFF
Wide Dynamic Range causes the camera to take multiple expo-
Select this to go back to the Main Menu.
For camera connection instructions and an explanation of the PTZ
10