Toshiba e-STUDIO 2000AC Copying Manual page 72

3.HOW TO USE EDITING FUNCTIONS
3 Adjust the width of the binding margin, and press [OK].
To adjust the binding margin width, press [Front Margin] and enter the binding margin width on the front side
using [ 0 mm] (0") and [
When you press [Back Margin] and then adjust the binding margin width on the back side using [
and [ 100 mm] (3.94"), only the width on the back side is adjusted.
Note that a margin will be created on the opposite side on the back side of paper in duplex copying.
Press [OK].
4
72 Creating Margins
100 mm] (3.94"). (The width on the back side will be also adjusted in the same way.)
0 mm] (0")