Toshiba e-STUDIO 2000AC Copying Manual page 50

2.HOW TO MAKE COPIES
4 Select the desired copy paper size, and then press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
5
If "Non-Sort Non-Staple" is selected as a sorting mode, scanning of the original starts. If another sorting mode is
selected, follow the procedure below.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on
6
the control panel.
Scanning of the next original starts. If you have more than one original, repeat this step until the scanning of all
the originals is finished.
When the scanning of all the originals is finished, press [Job Finish] on the touch panel.
7
Copying starts.
50 Enlarging or Reducing Images